Vail 120DB Fabric Frame 9X10 ft. Single-Sided Non-Backlit (Graphic Package)

Vail-120DB 9' x 10' Single-Sided Graphic Package. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is just as thick as the VAIL-120D. This display is easy to mount on the wall because it is lightweight, but can also hang overhead or stand independently. VAIL-120DB is especially good for edge-lights since its spine is shorter, holding the lights very close to the graphic's edges. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit).

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.

Material: Fabric

Print Process: Full Color Dye Sublimation

Hardware Setup: : To make one edge of the frame, take two matching-sized extrusions and, between, add Split Connector; tighten. Repeat this three times. Take one completed 9' and 10' edge and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.

Upgrade to Replace: VAIL Toolless Corner Connector and Split Connectors

Graphic Installation: Transversely, push corners of graphic into the frame's recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

W arranty: Lifetime on frame; one (1) year on graphics

Frame Size: 108"W x 120"H x 1.57"D

Artwork Size: 110"W x 122"H

Shipping Dimensions: (2) boxes 73.25"L x 7.25"W x 6.5"H